How to Install and Activate Microsoft Office 2019 For Free

Hello and Welcome to GetWebInfo.Com. Here on this post you can be able to know that How to Install and Activate Microsoft Office 2019 For Free. After a series of preview version Microsoft finally came out with an official version of Office 2019. This mean that you can now download and use it without worrying about fatal errors which you have gotten in beta versions before. However, I regret to inform that according to the disclosures, Microsoft Office 2019 only works on Windows 10. So if you are using Windows 8.1 or older versions, you will not be able to install it. Honestly i hate what Microsoft have done to force user to use Windows 10. An i think Office 2016 is still a good choice for casual users at the moment.



How to Install Office 2019 Without a Product Key

After the download process is complete, you will get an image file. Just open it then run the setup file to install Office 2019 on to your PC.

You can download Office 2019 Just Click Here




After Downloading Just Click on Setup.exe button (It's just looks like that)

When you click on it it can show the message that can ask you permission to install Mcirosoft Office to your PC.


This will take a while please wait.


Upon successful Installation you can open any Office Program to verify some basic information.




Just skip the "Enter Product Key" window by click close button at the top right corner.





An as you can see, I am using Office Professional Plus 2019 and the trial license will expire in 7 days. 



How To Activating Microsoft Office 2019 Using KMS License Key 

Step 1: Copy the following code in to a New Text Document.








@echo off
title Activate Microsoft Office 2019 ALL versions for FREE!&cls&echo ============================================================================&echo #Project: Activating Microsoft software products for FREE without software&echo ============================================================================&echo.&echo #Supported products:&echo - Microsoft Office Standard 2019&echo - Microsoft Office Professional Plus 2019&echo.&echo.&(if exist "%ProgramFiles%\Microsoft Office\Office16\ospp.vbs" cd /d "%ProgramFiles%\Microsoft Office\Office16")&(if exist "%ProgramFiles(x86)%\Microsoft Office\Office16\ospp.vbs" cd /d "%ProgramFiles(x86)%\Microsoft Office\Office16")&(for /f %%x in ('dir /b ..\root\Licenses16\ProPlus2019VL*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%%x" >nul)&(for /f %%x in ('dir /b ..\root\Licenses16\ProPlus2019VL*.xrm-ms') do cscript ospp.vbs /inslic:"..\root\Licenses16\%%x" >nul)&echo.&echo ============================================================================&echo Activating your Office...&cscript //nologo slmgr.vbs /ckms >nul&cscript //nologo ospp.vbs /setprt:1688 >nul&cscript //nologo ospp.vbs /unpkey:6MWKP >nul&cscript //nologo ospp.vbs /inpkey:NMMKJ-6RK4F-KMJVX-8D9MJ-6MWKP >nul&set i=1
:server
if %i%==1 set KMS_Sev=kms7.MSGuides.com
if %i%==2 set KMS_Sev=kms8.MSGuides.com
if %i%==3 set KMS_Sev=kms9.MSGuides.com
if %i%==4 goto notsupported
cscript //nologo ospp.vbs /sethst:%KMS_Sev% >nul&echo ============================================================================&echo.&echo.
cscript //nologo ospp.vbs /act | find /i "successful" && (echo.&echo ============================================================================&echo.&echo #My official blog: MSGuides.com&echo.&echo #How it works: bit.ly/kms-server&echo.&echo #Please feel free to contact me at msguides.com@gmail.com if you have any questions or concerns.&echo.&echo #Please consider supporting this project: donate.msguides.com&echo #Your support is helping me keep my servers running everyday!&echo.&echo ============================================================================&choice /n /c YN /m "Would you like to visit my blog [Y,N]?" & if errorlevel 2 exit) || (echo The connection to my KMS server failed! Trying to connect to another one... & echo Please wait... & echo. & echo. & set /a i+=1 & goto server)
explorer "http://MSGuides.com"&goto halt
:notsupported
echo.&echo ============================================================================&echo Sorry! Your version is not supported.&echo Please try installing the latest version here: bit.ly/aiomsp
:halt
pause >nul




Step 3: Run this Batch file with admin rights.




Step 4: Done! you Office product has been activated successfully. Please check activation status again.




Note: If you PC can not connect to any KMS servers, please try running the batch file again.

At the End you can see this message on dmc file.




I Hope this Article is really helpful for you if you like this article so please share it on social Media and thanks for reading. If you have any question or concerns, please leave your comments. I would be glad to explain in more details. 

How to Change Default Installation Directory in Windows 7/8/10

Hello and welcome to GetWebInfo.Com. Here on this post you can be able to find out latest article are about That How to Change Default Installation Directory in Windows 7/8/10. By default windows installs all the programs in C:\Program Files or C:\Program File (x86) directory depending on the type of Window 10 and program you are installing.



You might want to change the default installation directory if your "C" drive is running out of free space. While some programs allow you select the install drive and directory, most programs don't offer the option to select installation drive. For instance, setup of antivirus programs like Kaspersky Internet Security and Norton don't offer an option to select the default installation directory during the product installation.



If you want to change the default installation location of programs in Windows 7/8/10, there is an easy workaround. You just need to edit the registry to change the default installation directory or path To start with this guide, make sure you have enough free space in your new directory which you are going to make as default one.

You need to do small registry change in order to change your default installation directory as follows.

Changing default installation directory

Important: We recommend you to create a manual system restore point or backup registry so that you can easily restore setting if requires.

Warning: This is an advanced guide, So proceed at your own risk.

Step 1. Type "regedit" in start menu / taskbar search box or in Run dialog box and hit enter key to continue.

Step 2. Navigate to the following registry key in the Registry Editor:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion

Step 3. On the right-side, locate the value named "ProgramFilesDir" and change the default value "C:\Program File" to your new directory path (address).




Next find out ProgramFileDir (x86), double-check on it and change it value data to a location where you want to install programs by default.


Step 4. Finally close the registry editor and reboot your syste to apply the change. You might need to restart your Computer to apply the change, Download a program and try to install it and check if it's installed in the new installation directory.

This tweak also work find with Window XP and Windows Vista as well.

How to Add Missing Winrar Entry in The Right Click Context Menu

Hello and Welcome to GetWebInfo.Com. Here on this post you can be able to know about the topic of that How to Add Missing Winrar Entry in The Right Click Context Menu. On this post i am writing this post upon request from one of our regular reader. Sometimes WinRar entry in the right click context menu disappears even if you have installed WinRar without any problem. This is really annoying as you need to open WinRar program from start menu entry to extract any RAR file.












Fix: WinRAR Entry Missing From Context Menu

If you have successfully installed WinRAR, you should see the entry in the right click context menu for zipped files. Suppose, you can't see the entry means you need to follow the below procedure to see the entry, The solution is simple.


Step 1: Ope WinRAR from the start men entry, if you can't see WinRar entry in the start menu. go to C:\Program File\WinRAR (where"C" is your OS drive), and double click WinRAR.exe to open WinRAR.

Step 2: Swith to "Option" tab and the, open "Setting" Option.

Step 3: Once again switch to "Integration" tab in the new window.

Step 4: Check the option name" Integrate WinRAR into shell" and click ok.

Now you should see the WinRAR entry.............

How to Enable or Disable Hibernate Option in Windows 7

Hello and welcome to GetWebInfo.Com. Here on this post you can be able to Find out Latest Article are about Windows that How to Enable or Disable Hibernate Option in Windows 7. In Windows XP enabling Hibernate option was a very easy task. One could navigate to Control Pane, Power Options and then Hibernate tab to enable or disable Hibernation feature. But in Windows7, We have to follow a different approach to do the same job.



What is Hibernation Feature in Windows?




If you are not aware of Hibernate feature, Hibernation is a power- saving state designed primarily for laptops. While sleep puts your work and setting in memory and draws a small amount of power, hibernation puts your open documents and programs on your hard disk and then turns off your computer. Of all the power-saving states in Window, hibernation uses the least amount of power. On a laptop, use hibernation when you know that you won't use your laptop for an extended period and worn't have an opportunity to charge the battery during that time.


Enable or Disable Hibernation in Window 7

So if you are really going to use this feature then you need to enable it by doing a simple procedure as mentioned below:

Step 1: Open command Prompt with Administrator rights. To open Command Prompt, type CMD in Start menu and then hit CTRL + Shift + Enter to open the command prompt with Admin right.

Step 2: Next type of the below command and hit enter.

powercf / hibernate on



Step 3: Type exit and hit enter to close the Command Prompt.

Step 4: If you can't see the Hibernate Option in Start Menu then continue with the following tasks.

A. Type Power options in Start menu and hit enter.

B. In the left pane, open the link Labeled "Change when the computer sleeps" and then open the link "Change advanced power settings"



C. Under the Advanced Sleep options, expand the Sleep tree and turn off Hybrid Sleep.

D. Now go back to start menu to see the new Hibernate Entry. That's It! Now you can all Done.......

2 Easy Ways to Active Windows 10 For Free Without Any Software

Hello and Welcome to GetWebInfo.Com. Here on this post you can be able to know that Here are 2 Easy Ways to Active Windows 10 For Free Without Any Software. As you know microsoft notified windows 10 is the last version of windows and explained that they will be focused on the development of powerful and new features under the guise of software updates instead of building a new version. This means there will be no windows 11 in the future. So if you are thinking about an upgrade this is the best time to get it.


Windows 10 Free Upgrade



The representative of Microsoft has confirmed that window 10 is a free upgrade for all customers using a genuine copy of Windows 7 or higher. But this offer officially will expire on this Friday so do not hesitate to own it before it is to late. Your time is running out. After July 29, the upgrade will cost up to $119 for Home edition or $199 for Professional one. Personally that amount of money is enough to pay my rent this month so there are no reason for me to deny that.

Active Window 10 Without Using Any Software


If you are using another version of Window, please go to Homepage and select a suitable method.

Method 1: Manually Activate

Step 1: Select the right key for your windows.

Here is the list of Windows 10 volume license keys.

Home: TX9XD-98N7V-6WMQ6-BX7FG-H8Q99
Home N: 3KHY7-WNT83-DGQKR-F7HPR-844BM
Home Single Language: 7HNRX-D7KGG-3K4RQ-4WPJ4-YTDFH
Home Country Specific: PVMJN-6DFY6-9CCP6-7BKTT-D3WVR
Professional: W269N-WFGWX-YVC9B-4J6C9-T83GX
Professional N: MH37W-N47XK-V7XM9-C7227-GCQG9
Education: NW6C2-QMPVW-D7KKK-3GKT6-VCFB2
Education N: 2WH4N-8QGBV-H22JP-CT43Q-MDWWJ
Enterprise: NPPR9-FWDCX-D2C8J-H872K-2YT43
Enterprise N: DPH2V-TTNVB-4X9Q3-TJR4H-KHJW4
Step 2: Right click on the start button and open Command Prompt (Admin Panel)


Step 3: Use the command "slmg/ipk yourlicensekey" to install a license key (yourlicensekey is the activation key you got above)


 (Note: You need to hit Enter key to execute command)


Step 4: Use the Command "slmgr/skms kms8.msguides.com" to connetct to MsDesign  KMS server





Step 5: The last step is to activate your windows using the command "slmgr/ato"



You can check the Activation Status Again.



Method 2: Using a Batch File

Step 1: Copy the following code in to a new text document.

@echo off
title Activate Windows 10 ALL versions for FREE!&cls&echo ============================================================================&echo #Project: Activating Microsoft software products for FREE without software&echo ============================================================================&echo.&echo #Supported products:&echo - Windows 10 Home&echo - Windows 10 Home N&echo - Windows 10 Home Single Language&echo - Windows 10 Home Country Specific&echo - Windows 10 Professional&echo - Windows 10 Professional N&echo - Windows 10 Education&echo - Windows 10 Education N&echo - Windows 10 Enterprise&echo - Windows 10 Enterprise N&echo - Windows 10 Enterprise LTSB&echo - Windows 10 Enterprise LTSB N&echo.&echo.&echo ============================================================================&echo Activating your Windows...&cscript //nologo slmgr.vbs /ckms >nul&cscript //nologo slmgr.vbs /upk >nul&cscript //nologo slmgr.vbs /cpky >nul&set i=1&wmic os | findstr /I "enterprise" >nul
if %errorlevel% EQU 0 (cscript //nologo slmgr.vbs /ipk NPPR9-FWDCX-D2C8J-H872K-2YT43 >nul&cscript //nologo slmgr.vbs /ipk DPH2V-TTNVB-4X9Q3-TJR4H-KHJW4 >nul&cscript //nologo slmgr.vbs /ipk WNMTR-4C88C-JK8YV-HQ7T2-76DF9 >nul&cscript //nologo slmgr.vbs /ipk 2F77B-TNFGY-69QQF-B8YKP-D69TJ >nul&cscript //nologo slmgr.vbs /ipk DCPHK-NFMTC-H88MJ-PFHPY-QJ4BJ >nul&cscript //nologo slmgr.vbs /ipk QFFDN-GRT3P-VKWWX-X7T3R-8B639 >nul&goto server) else wmic os | findstr /I "home" >nul
if %errorlevel% EQU 0 (cscript //nologo slmgr.vbs /ipk TX9XD-98N7V-6WMQ6-BX7FG-H8Q99 >nul&cscript //nologo slmgr.vbs /ipk 3KHY7-WNT83-DGQKR-F7HPR-844BM >nul&cscript //nologo slmgr.vbs /ipk 7HNRX-D7KGG-3K4RQ-4WPJ4-YTDFH >nul&cscript //nologo slmgr.vbs /ipk PVMJN-6DFY6-9CCP6-7BKTT-D3WVR >nul&goto server) else wmic os | findstr /I "education" >nul
if %errorlevel% EQU 0 (cscript //nologo slmgr.vbs /ipk NW6C2-QMPVW-D7KKK-3GKT6-VCFB2 >nul&cscript //nologo slmgr.vbs /ipk 2WH4N-8QGBV-H22JP-CT43Q-MDWWJ >nul&goto server) else wmic os | findstr /I "10 pro" >nul
if %errorlevel% EQU 0 (cscript //nologo slmgr.vbs /ipk W269N-WFGWX-YVC9B-4J6C9-T83GX >nul&cscript //nologo slmgr.vbs /ipk MH37W-N47XK-V7XM9-C7227-GCQG9 >nul&goto server) else (goto notsupported)
:server
if %i%==1 set KMS_Sev=kms7.MSGuides.com
if %i%==2 set KMS_Sev=kms8.MSGuides.com
if %i%==3 set KMS_Sev=kms9.MSGuides.com
if %i%==4 goto notsupported
cscript //nologo slmgr.vbs /skms %KMS_Sev%:1688 >nul&echo ============================================================================&echo.&echo.
cscript //nologo slmgr.vbs /ato | find /i "successfully" && (echo.&echo ============================================================================&echo.&echo #My official blog: MSGuides.com&echo.&echo #How it works: bit.ly/kms-server&echo.&echo #Please feel free to contact me at msguides.com@gmail.com if you have any questions or concerns.&echo.&echo #Please consider supporting this project: donate.msguides.com&echo #Your support is helping me keep my servers running everyday!&echo.&echo ============================================================================&choice /n /c YN /m "Would you like to visit my blog [Y,N]?" & if errorlevel 2 exit) || (echo The connection to my KMS server failed! Trying to connect to another one... & echo Please wait... & echo. & echo. & set /a i+=1 & goto server)
explorer "http://MSGuides.com"&goto halt
:notsupported
echo ============================================================================&echo.&echo Sorry! Your version is not supported.&echo.
:halt
pause >nul

Step 2: Create a New Text Document



Step 3: Paste the code in to the text file. Then save this file as a batch file ( You can give it the name "1click.cmd")



Step 3: Run the batch file as Administrator




Now you can All Done Finally The Message Appear like that 


I Hope this Article is really helpful for you if you like this article so please share it on social media with your friends thanks for reading.

How to Recover Deleted Sticky Notes in Windows

Hello and Welcome to GetWebInfo.Com. Here on this Post you can be able to know that How to Recover Deleted Sticky Notes in Windows. Sticky Notes first introduced with Windows vista is an amazing utility to quickly write down ideas or everything else that comes to your mind. The native Sticky notes program window 10/8/7 doesn't offer features available in some third party programs but it's good solution to quickly jot down a contact number, email address or write a to do list.



Deleting a Sticky Notes on the desktop is easier than creating it! You just need to click the close X button located upper right corner of a Note. With default setting, Sticky Notes does ask for the confirmation when click the close button but if you have turned off the feature, it will simply delete the note instead of closing when you click the X button.


if you have accidentally deleted a Sticky Notes in Windows 7, Windows 8 or Windows 10, here is how to recover the deleted note without the help of third party tools.




Recovering deleted notes

Step 1: Ope Run command box by simultaneously pressing Windows and R keys.

Step 2: In the Rung box, paste the following path and press Enter key.

%AppData%\Microsoft\Sticky Notes\



Step 3: Under Sticky notes folder, you should see Sticky Notes (.SNT) file. Double clicking on the file will not give you any results because Window doesn't associate .SNT extension to Sticky Notes or any other program with default settings.


Now right click on that Sticky Notes (.SNT) file and then open it with a good text editing program. For the best results, we recommend you open the file with Microsoft Office word Program.

Once the file is open in word, the actual contents of the Note will appear towards the end of the document.




Note 1: We did try to open the file with Notepad but we were unable to locate the actual notes. Opening the file with Office Word is the best solution to recover the content. If Word isn't installed on Your PC, you can try opening the Sticky Notes .SNT file in a program equivalent to Office Word.

Note2: If required content is not present, you could try to restore the file to a previous version by try right- clicking on Sticky Notes .SNT and whtn clicking Restore previous versions. If there are no previous version of the file available that is because File History Feature is turned off.

Bonus: Enable delete confirmation for Sticky Notes

If you have turned off delete confirmation prompt for Sticky Notes, we recommend you turn on the same to avoid going through the above steps again in future. Complete the given below steps to enable delete confirmation box for Sticky Notes.


Step 1: Open Registry Editor by trying Regedit in Start menue, Start screen or Run box and then pressing Enter key.

Step 2: Navigate to the following key:

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\StickyNotes


Step 3: On the right side double click on Prompt on Delete value and change its value from 0 to 1 (one) to enable the delete confirmation. From now onward whenever you click the X button on a note, you shall see "Delete Note: Are you sure you want to delete this Note" warning message on the screen with Yes and No button.

I Hope this Article is really helpful for you if you like this Article so please share it with your friends on Social Media thanks for reading.....

How to Run Control Panel As Administrator in Windows

Hello and Welcome to GetWebInfo.Com. Here on this post you can be able to know that How to Run Control Panel As Administrator in Windows. To start with windows doesn't let you run control panel as administrator. This is because, in windows 7, Windows 8 or 8.1 and Windows 10, you gain nothing by launching control panel as administrator. That is, in short, control panel is just a simple way to access all tools and options available in windows. In other words, in includes only shortcuts to programs and administrator tools such as Programs and Features and Folder options.






That said there is a workaround to open control panel as administrator in Windows 7, Windows 8 and Windows 10 if you really want to open control panel as admin. All you need to do is simply creat a shortcut to the Control panel on your desktop and then configure window to Launch the shcortcut as administrator.


<div style="clear:both; margin:10px 0">
<center>
<script type="text/javascript">
    google_ad_client = "ca-pub-3526495461665243";
    google_ad_slot = "6270320767";
    google_ad_width = 336;
    google_ad_height = 280;
</script>
<!-- Post AD -->
<script type="text/javascript"
src="//pagead2.googlesyndication.com/pagead/show_ads.js">
</script>
</center>
</div>

Open Control Panel As Administrator

Here is how to open Control Panel with Admin privileges in Windows 7, Windows 8 and Windows 10.

Step 1: Right click on desktop, click new and then click shortcut to open create shortcut wizard.


Step 2: In the type of the location of the item box, paste the following path:

C:\Windows\System32\control.exe

Please replace"C" with the drive letter of the partition where windows is installed.


Click on the Next button.

Step 3: Enter a name for the new Shortcut. We recommend you name it as Admin Control Panel so that you can easily recognize it.


Click Finish button to create shortcut to Control Panel on Desktop.

Step 4: You can now right-click on the shortcut and then click Run as Administrator option to open Control Panel with admin rights. If you want open the Control Panel with admin rights by simply double-clicking on it, please follow the next three steps in order to configure the shortcut to always launch as administrator.



Step 5: Now right click on control panel shortcut on the desktop and click on properties to open properties dialog box.


Step 6: Switch to the shortcut tab and then click Advanced button open Advanced Properties dialog.


Step 7: Finally check the option labelled Run as administrator option, click OK and then click on Apply button. Now that's it you can all DONE!


You can now double click on the Control Panel shortcut on the desktop to launch Control Panel as administrator. But as said before, there is nothing you can do by running Control Panel as administrator. I Hope this Article is really help full for you. If you like this article so please share it with your friends on Social Media Thanks for Reading.